WiFi is not available.

Local Audio Source Amplifier or Preamp AMP-100

Home
Amplifiers Preamps
Audio Source
Audio Source Amplifier or Preamp AMP-100

Enlarge

Audio Source 2-Channel Bridgeable Stereo Power Amplifier - 2 X 50-Watts (8 Ohms), 2 X 60-Wa- Audio Source-Computers & Electronics-Home Theater & Audio-Speakers
Model: AMP-100 UPC: 041087001658

Description: AudioSource Amp 100 - Amplifier AudioSource has produced a distinguished line of stereo power amplifiers. AudioSource's amps provide high sound pressure levels, as well as subtle details with accuracy and transparency. You won't find better sounding amps at anywhere near the price. A torodial power transformer keeps stray magnetic fields to a minimum and the discrete output devices ensure pure signal fidelity. Separate channel level controls allow for individual adjustment. A defeatable peak limiter circuit protects speakers form distortion at high volumes and an auto-circuit power up the unit with a preamp signal and powers it down when no signal is present. AMP 100 is a stereo amplifier with 50 watts per channel, aux power for Home-theater receivers or single zone distribution. The amp features A and B Speaker switching on front panel and independent Left and Right channel level controls.

More Info

Where to Buy Locally

Features

2-channel 100-watt (50 watts x 2) power amplifier (provides 150 watts RMS bridged mono power)
Ideal for use as a second-zone amp or a rear-channel amp in a multi channel system
Delivers a crisp, clean sound with a frequency response of 20Hz~20KHz and 0.02% THD.
Dual line-level inputs with priority override and line-level outputs
Signal-sensing auto-on/off switching conserves power while simplifying setup
Front panel level and balance controls
5-way speaker binding posts work with both bare wire and banana plugs

Specifications

General
Depth	8 in
Dimensions (WxDxH) / Weight	Amplifier
Height	2.8 in
Product Type	Amplifier
Weight	7.9 lbs
Width	16.5 in

Audio System
Additional Features	Auto power on/off, A/B/A+B speaker switch, mono/stereo switch
Amplifier Output Details	50 Watt - 8 Ohm - THD 0.2% - 2 channel(s) ( main ) 60 Watt - 4 Ohm - THD 0.2% - 2 channel(s) ( main )
Input Sensitivity	775 mV
Output Power / Total	100 Watt
Signal-To-Noise Ratio	94 dB
Sound Output Mode	Stereo

Product Overview
Type of Speakers	Amplifier

Power
Power Device	Power supply - internal
Power Outlets	1 AC outlet

Connections
Connector Type	2 x audio line-in ( RCA phono x 2 ) - rear 1 x audio line-out ( RCA phono x 2 ) - rear 4 x speakers output ( banana/spade x 2 ) - rear