|
JL Audio Slash v2 Series Four-Channel Full-Range Mobile Amplifier
Model: 4504V2 UPC: 699440980845
Description: The original Slash amplifiers set new performance standards for automotive amplification and became the best-selling premium mobile amplifiers in history. The new Slash v2 amplifiers build on this legendary technology platform, enhancing it in a variety of key areas, like radically improved thermal performance, a beautiful new stackable chassis design and dozens of tweaks aimed at improving performance, flexibility and reliability. There is no magic and no guesswork here... just pure technology, refined to the last detail.
Minimize
|
Features
- R.I.P.S. System? The remarkable R.I.P.S. System? ensures consistent power delivery over a wide range of battery voltages and load impedances
- Patented Absolute Symmetry? A/B Circuitry (U.S. Patent #6,294,959) Patented Absolute Symmetry? Class A/B output stage minimizes distortion over a wide range of load impedances.
- Differential-Balanced Inputs Greatly reduce noise and provide compatibility with a wide range of sources, including most OEM systems
- Flexible Preamp Outputs Simplify interconnection of multiple amplifiers and offer multiple signal source choices (except 250/1v2 & 300/4v2)
- Remote Bass Control (RBC-1) With the addition of an RBC-1 you can control the bass boost level from the front of the car (250/1v2, 500/1v2, 1000/1v2 & 450/4v2 only)
- Patented Class D Circuitry (U.S. Patent #6,441,685) Our Patented Class D amplifier circuit delivers high efficiency without sacrificing fidelity
- NEW - Monolithic RealSink? and Advanced Heat Management Vertical fins on a monolithic cast aluminum structure dissipate heat 50% better than the original Slash amplifiers, without resorting to noisy fan cooling
- Active Crossover Features Variable slope (12 or 24dB/octave), fully variable frequency selection with x10 multiplier switch, detented frequency selection... every control freak's dream
- Bass Control Features The 450/4v2 and all monoblock models offer comprehensive bass equalization features and infrasonic filters
Specifications
| Description |
Class A/B Four-Channel System Amplifier |
| Patented Technology |
Absolute Symmetry? Class A/B Circuit (U.S. Patent #6,294,959) |
| Differential-Balanced Input Topology |
2 pair of inputs |
| Channel 1&2 Crossover |
Fully-variable (50 Hz - 5 kHz), selectable-slope (12 or 24 dB per octave) LP, BP or HP |
| Channel 3&4 Crossover |
Fully-variable (50 Hz - 5 kHz), selectable-slope (12 or 24 dB per octave) HP |
| Preamp Output |
2-channel (Pass-through) |
| Bass EQ |
+6 dB (variable boost up to +15 dB with Remote Bass Option) |
| Infrasonic Filter (Channels 1&2 only) |
Defeatable 24dB / octave at 30 Hz |
| All speaker output connections |
Accept up to 8 AWG wire |
| +12V and Ground connections |
Accept up to 4 AWG wire |
| Rated Power Channels 1&2 stereo mode |
150 W RMS x 2 @ 1.5 ohm ? 4 ohm (11 ? 14.5V) |
| Rated Power Channels 1&2 bridged mode |
300 W RMS x 1 @ 3 ohm ? 8 ohm (11 ? 14.5V) |
| Rated Power Channels 3&4 stereo mode |
75 W RMS x 2 @ 1.5 ohm ? 4 ohm (11 ? 14.5V) |
| Rated Power Channels 3&4 bridged mode |
150 W RMS x 1 @ 3 ohm ? 8 ohm (11 ? 14.5V) |
| THD at Rated Power (All Channels) |
<0.03% @ 4 ohm |
| S/N Ratio (All Channels) |
>108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Frequency Response (All Channels) |
5 Hz - 30 kHz (+0, -1dB) |
| Damping Factor (All Channels) |
>200 @ 4 ohm / 50 Hz |
| Slew Rate (All Channels) |
?25 V / ?S @ 4 ohm per ch. |
| Left to Right Channel Separation |
>75 dB @ 1 kHz |
| Input Range |
Switchable from 200mV-2V RMS to 800mV-8V RMS |
| Length |
19.70" |
| Width |
9.25" |
| Height |
2.36" |
| Shipping |
20 lbs |
|
349.99
at Sears
|
